VFD Cable
VFD Cable
Why VFD Cables?
Industrial growth has amplified the use of machinery powered by variable frequency drives (VFDs) for efficient operation. While standard cables may struggle with challenges like electromagnetic interference and voltage spikes, using VFD-specific cables mitigates these risks, ensuring reliable performance. Choosing the right cabling enhances system efficiency, protects equipment, and extends the overall lifespan of your setup.
Several key criteria must be considered when selecting VFD cable such as:
Voltage Level: VFD cable is typically rated up to 600V, 1000V, and 2000V. Higher voltage levels require thicker, more robust insulation to resist high voltage spikes.
Cable Run Length: VFD cable is offered in different configurations for longer cable runs via specific design and construction methods.
Shielding: Different shielding types mitigate potential electromagnetic interference with nearby low-voltage or communications cabling. This reduces EMI/RFI noise.
Flexibility: Flexibility ensures easy installation in tight spaces, supports frequent movement, and reduces cable stress, enhancing durability and performance.
Common Mode Noise: XLPE insulation can reduce common mode current (CMC) which can damage the motor (causing bearing fluting damage).
| HIGH-PERFORMANCE VFD CABLES | ÖLFLEX® VFD Slim | ÖLFLEX® VFD 1XL | ÖLFLEX® VFD 2XL |
|---|---|---|---|
| Duty & Performance Rating | Light duty, Good Performance | Medium duty, Better Performance; Reduced diameter for ease of installation; Continuous flex (w/o Signal Pair) | Heavy duty, Excellent Performance |
| Cable Installation Distance | <50 ft (<15 meters) | 50 to 300 ft (15 to 91 meters) | Up to 300ft and above (91 meters +) |
| Nominal Voltage | Suitable for 1000V applications | Suitable for 1000V applications | Suitable for 2000V applications |
| Electrical Characteristics | Good capacitance and impedance to withstand electrical irregularities | Improved dielectric characteristics | Excellent electrical properties with a Low capacitance design |
| Insulation & Jacket | Semiconductive “Surge Guard” insulation and PVC/NYLON jacket | Thin-walled XLPE (plus) insulation and TPE jacket | RHW-2 XLPE (plus) insulation and TPE jacket |
| Cable Configurations | Optional available control signal pair | Standard & symmetrical grounds designs; optional available control signal pair | |
| Shielding | Shielding triple layer foil tape + tinned copper braid | Shielding triple layer foil tape + tinned copper braid | Shielding triple layer foil tape + tinned copper braid |
-
OBSOLETE - Alpha Wire Industrial Series V-Flex VFD Cable VF16014 BK199 14 AWG 4 Conductor - BlackPart #: ALPVF16014-BK199
Mfg #: VF16014 BK199
Manufacturer: Alpha WireSERIES: Industrial Series V-Flex
CONDUCTOR MATERIAL: Tinned Copper
CONDUCTOR STRANDING: Stranded
STRAND COUNT: 41x30
SHIELDING: Foil Braid
JACKET MATERIAL: TPE (Thermoplastic Elastomer)
NOMINAL OD (IN): 0.584
NOMINAL OD (MM): 14.83
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CSA Approved
- OBSOLETE - Alpha Wire Industrial Series V-Flex VFD Cable VF16016 BK199 16 AWG 4 Conductor - BlackPart #: ALPVF16016-BK199
Mfg #: VF16016 BK199
Manufacturer: Alpha WireSERIES: Industrial Series V-Flex
CONDUCTOR MATERIAL: Tinned Copper
CONDUCTOR STRANDING: Stranded
STRAND COUNT: 26x30
SHIELDING: Foil Braid
JACKET MATERIAL: TPE (Thermoplastic Elastomer)
NOMINAL OD (IN): 0.545
NOMINAL OD (MM): 13.84
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CSA Approved
- 1229502 - Belden VFD Cable - 12 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229502
Mfg #: 1229502
Manufacturer: BeldenSHIELDING: Tinned Copper; Tri-Laminate (Aluminum/Polyester/Aluminum)
JACKET MATERIAL: PVC (Polyvinyl Chloride)
- 1229504 - Belden VFD Cable - 8 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229504
Mfg #: 1229504
Manufacturer: Belden - 1229505 - Belden VFD Cable - 6 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229505
Mfg #: 1229505
Manufacturer: BeldenSHIELDING: Tri-Laminate (Aluminum/Polyester/Aluminum); Tinned Copper
JACKET MATERIAL: PVC (Polyvinyl Chloride)
- 1229506 - Belden VFD Cable - 4 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229506
Mfg #: 1229506
Manufacturer: BeldenSHIELDING: Tri-Laminate (Aluminum/Polyester/Aluminum); Tinned Copper
JACKET MATERIAL: PVC (Polyvinyl Chloride)
- 1229507 - Belden VFD Cable - 2 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229507
Mfg #: 1229507
Manufacturer: Belden - 1229530 - Belden VFD Cable - 2/0; 4 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229530
Mfg #: 1229530
Manufacturer: Belden - 1229532 - Belden VFD Cable - 4/0; 2 AWG 3 Conductor - Shielded Polyvinyl ChloridePart #: BEL1229532
Mfg #: 1229532
Manufacturer: Belden - 29500 - Belden VFD Cable - 16 AWG 3 Conductor - Shielded Polyvinyl Chloride - Matte Black - 8 mPart #: BEL29500
Mfg #: 29500
Manufacturer: Belden
