Power & Control Cable
Power and Control Cable
Power and control cables are the most common electrical cables used in residential, commercial, and industrial applications for power supply and signal transmission.
What is a power cable? A power cable is an assembly of one or more electrical conductors that transfer energy from its source – it’s usually the primary cable used to make its operating equipment work.
What is a control cable? Control cables are single or multiconductor cables that transfer data to other devices for measurement, regulation, and automation control.
Power and control cables are driven by application demands varying in levels of voltage, shielding options, flexibility requirements, oil resistance, and types of insulation to withstand environmental and operating conditions.
LAPP Tannehill maintains an extensive inventory of gauge sizes, stranding, insulation, and colors of power and control cable. The following table provides a few recommended types of power and control cable by general application. You can also browse our products below or contact us for additional assistance.
| Application Type | Suggested Power & Control Cable |
|---|---|
| Flexible Power & Control Cable | Alpha EcoFlex, LAPP ÖLFLEX®190 |
| Continuous Flex Power & Control Cable | Alpha Industrial Series F, LAPP ÖLFLEX® FD 855 P |
| VFD Cable | LAPP ÖLFLEX® VFD |
| Tray Rated Cable | LAPP ÖLFLEX® TRAY II |
| Stationary Power & Control Cable | Alpha Series M, LAPP ÖLFLEX® 490 P, LAPP ÖLFLEX® CLASSIC 100 |
Request a sample! If you aren't sure which type of power and control cable you need, you can request a sample. Fill out our form and a representative will reach out to get additional details.
Flexible Power & Control Cable
Flexible power and control cables feature specially formulated jackets which allow for easier installation and an increased bend radius. Available in shielded and unshielded options, these cables can be applied in many different applications such as VFD drive/motor connections, HVAC, conveyors, automated manufacturing systems, cable tracks, continuous flex applications, along with many others.
Lapp Tannehill maintains an extensive inventory of gauge sizes, stranding, insulation, and colors of flexible control cable. Browse our products below or contact us if you have any questions.
-
0029653 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 24 AWG 3pr Conductor - BlackPart #: OLF0029653
Mfg #: 0029653
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.315
NOMINAL OD (MM): 8
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029654 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 24 AWG 25 Conductor - Black
Part #: OLF0029654
Mfg #: 0029654
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.543
NOMINAL OD (MM): 13.8
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029655 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 22 AWG 2 Conductor - Black
Part #: OLF0029655
Mfg #: 0029655
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.205
NOMINAL OD (MM): 5.2
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029656 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 22 AWG 3 Conductor - Black
Part #: OLF0029656
Mfg #: 0029656
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.213
NOMINAL OD (MM): 5.4
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029657 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 22 AWG 4 Conductor - Black
Part #: OLF0029657
Mfg #: 0029657
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.26
NOMINAL OD (MM): 6.6
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029658 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 22 AWG 5pr Conductor - Black
Part #: OLF0029658
Mfg #: 0029658
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.402
NOMINAL OD (MM): 10.2
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029689 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 16 AWG 12 Conductor - Black
Part #: OLF0029689
Mfg #: 0029689
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.606
NOMINAL OD (MM): 15.4
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
- 0029690 - LAPP ÖLFLEX® ROBOT F1 ( C ) Shielded Multiconductor Cable - 16 AWG 18 Conductor - Black
Part #: OLF0029690
Mfg #: 0029690
Manufacturer: LAPPRobotic cable for flexing & torsion motion with UL & c(UL) AWMSERIES: ÖLFLEX® ROBOT F1(C)
CONDUCTOR MATERIAL: Bare copper
CONDUCTOR STRANDING: Stranded
SHIELDING: Braid
JACKET MATERIAL: Polyurethane (PUR)
NOMINAL OD (IN): 0.728
NOMINAL OD (MM): 18.5
VOLTAGE: 600V
STANDARDS/APPROVALS: UL Approved, CE Approved
